WhAT is arg?
The gyroscopic unit is made up of a spinning rotor, which is powered by an electric motor. The rotor is mounted on bearings that allow it to rotate freely in any direction. The control system uses sensors to monitor the yacht's roll and pitch and sends signals to the gyroscopic unit to adjust the rotor's position in order to counteract the motion. This creates a force that opposes the roll, which helps to keep the yacht steady.
|
|
Why Choose ARG?
- Unparalleled Performance - ARG is proven over the past 25 years of service, optimal performance with a products that outlast our closest competitors by 4-6 times the lifespan
- Simplified Installation- installation can be completed within 1-3 weeks, with the vessel in the water no through-hull fittings or sea-water cooling required, MAKAN YACHT GROUP will connect the driver and bolt the gyro in place with the ARG supplied heavy-duty hardware
- Streamlined Operating System- The entire design of the TOHMEI ANTI ROLLING GYRO's is founded on the idea that Daily Operations consists of nothing more than turning ON the unit when you step on your vessel, and turning it OFF your gyro when you leave.
- Zero to Low Maintenance - No vacuum chambers to maintain. There are no complicated high pressure hydraulic lines or pumps. There are no fresh or raw water pumps, no heat exchangers to leak or maintain. No need to worry about anodes and electrolysis.
Gyro Models
Backed up by an unmatched 5 Year 6000 Hr warranty
< 8T VESSEL |
ARG- 50T$31,900 USD
not including taxes or installation Anti-Rolling Torque 5,000Nm Height 525 mm (20.6 in) Depth 536 mm (21.1 in) Width 741mm (29.1 in) Power 700 – 1,000W (12-24v DC or 110-240v AC) Spool-up Time to Stabilization / Maximum RPM 20min / 25min Weight 234 kg (515 lbs) |
< 10T VESSEL |
ARG-65T
$33,500 USD
not including taxes or installation Anti-Rolling Torque 6,500Nm Height 525 mm (20.6 in) Depth 536 mm (21.1 in) Width 741mm (29.1 in) Power 1,400 – 1,800W (12-24v DC or 110-240v AC) Spool-up Time to Stabilization / Maximum RPM 25min / 30min Weight 234 kg (515 lbs) |
< 18T VESSEL |
ARG-130T$57,800 USD
not including taxes or installation Anti-Rolling Torque 13,000Nm Height 630 mm (24.8 in) Depth 620 mm (24.4 in) Width 950 mm (37.4 in) Power 1,800 – 2,500W (12-24v DC or 110-240v AC) Spool-up Time to Stabilization / Maximum RPM 25min / 30min Weight 380 kg (837 lbs) |
< 25T VESSEL |
ARG-175T
$59,800 USD
not including taxes or installation Anti-Rolling Torque 17,500Nm Height 630 mm (24.8 in) Depth 620 mm (24.4 in) Width 950 mm (37.4 in) Power 3,500 – 4,300W (12-24v DC or 110-240v AC) Spool-up Time to Stabilization / Maximum RPM 30min / 35min Weight 380 kg (837 lbs) |
< 35T VESSEL |
ARG-210T$96,200 USD
not including taxes or installation Anti-Rolling Torque 21,000Nm Height 700 mm (27.6 in) Depth 720 mm (28.3 in) Width 1020 mm (40.2 in) Power 2,300 – 4,000W Spool-up Time to Stabilization / Maximum RPM 30min / 35min Weight 700 kg (1543 lbs) |
< 40T VESSEL |
ARG-250T$98,200 USD
not including taxes or installation Anti-Rolling Torque 25,000Nm Height 700 mm (27.6 in) Depth 720 mm (28.3 in) Width 1080 mm (42.5 in) Power 3,500 – 4,800W Spool-up Time to Stabilization / Maximum RPM 35min / 40min Weight 700 kg (1543 lbs) |
< 50T VESSEL |
ARG-300T$131,800 USD
not including taxes or installation Anti-Rolling Torque 30,000Nm Height 780 mm (30.7 in) Depth 830 mm (32.7 in) Width 1120 mm (44.1 in) Power 3,000 – 3,900W Spool-up Time to Stabilization / Maximum RPM 35min / 40min Weight 910 kg (2006 lbs) |
< 60T VESSEL |
ARG-375T
$133,800 USD
not including taxes or installation Anti-Rolling Torque 37,500Nm Height 780 mm (30.7 in) Depth 830 mm (32.7 in) Width 1120 mm (44.1 in) Power 4,500 – 5,500W Spool-up Time to Stabilization / Maximum RPM 40min / 45min Weight 910 kg (2006 lbs) |
< 80T VESSEL |
ARG-250T (x2)Anti-Rolling Torque
50,000Nm Height 700 mm (27.6 in) x2 Depth 720 mm (28.3 in) x2 Width 1080 mm (42.5 in) x2 Power 3,500 – 4,800W x2 Spool-up Time to Stabilization / Maximum RPM 35min / 40min Weight 700 kg x2 (1543 lbs x 2) |
< 120T VESSELS |
ARG-375T x2Anti-Rolling Torque
75,000Nm Height 780 mm (30.7 in) x2 Depth 830 mm (32.7 in) x2 Width 1120 mm (44.1 in) x2 Power 4,500 – 5,500W x2 Spool-up Time to Stabilization / Maximum RPM 40min / 45min Weight 910 kg x2 (2006 lbs x 2) |